RVParkSupplies.com
Visa, Master Card, Discover Card, American Express
Enhanced Search

Bookmark this page

Standard Park or Campground Tilt Back Grill with Mounting Post

Standard Park or Campground Tilt Back Grill with Mounting Post
Part # GRILLCAMPSITETB

Volume Pricing
From: $209.00  
1-10 11+
 $209.00   $201.00 

Quantity: 

Our standard park campsite tilt back campground grill with mounting post is constructed of 0.1875 in thick steel and includes an integral ash retention flange and 3 drain holes on each side of grill. Drain holes are located along the very edge of the fire box on the bottom.

Park grill grate is constructed from 1/2 inch diameter A36 steel bars located on 1.125 inch centers. The four position theft proof grate adjusts from 3.5 inches to 9 inches above the firebox and has a cooking area of 300 square inches. This grill has a tilt back feature (see picture) which allows for easy fire building and cleaning.

Camp grill grate handles are constructed from 5/8 inch diameter steel bars equipped with stay cool spring grips.

Campsite grill is supported by a heavy duty 3.5 inch diameter post to be installed in concrete (in ground mounted). A surface mount post for existing concrete pads is also available. Post dimensions: 3.5 inch diameter x 40 inch long. Post allows for grill to rotate a full 360 degrees.

All joints are continuously welded. All exposed corners are chamfered for safety. Comes in a black non-toxic powder-coated finish.

Firebox Dimensions: 20.375 in W x 15 in L x 10.125 in H.

In ground mounting post included. To be installed in new concrete, not existing concrete.

Manufactured in the U.S.A. to keep Americans working.


Product has a 4 week lead time.


Seasoning your campground grill:

You should season the grill before preparing any food on the surface directly. Seasoning the grate can be done by burning the non-toxic paint off the grate bars as you use the grill. While the grate is heating, you can use a grill brush to clean the grate and scrape away any paint that loosens during the process. The grate will take time to season completely. Until then, you can use pans or aluminum foil to prepare your food.

Much like a cast-iron pan, building seasoning on the grill takes time and patience. As you use the grate, food particles will stick to the bars and build a protective coating for your guests to prepare food on. Before each use, it is important to use a brush to clean off any rust or loose particles from the grate after heating it. The grate can be lowered closer to the heat and then raised to be brushed before placing food on the grate.

Instructions for cleaning your campground grill:

At the start of each camping season, clean the grate with a wire brush to scrub any food remnants off the cooking grate. The cooking grate may also be cleaned with a mild dish soap, hot water and a sponge. Clean the outside and inside of the grill.

At the end of each camping season, remove ashes and place in a hot coal bin. We do not recommend cleaning the grill. Leaving the grease will help prevent rusting until the camping season begins again.

Go to top of this Standard Park or Campground Tilt Back Grill with Mounting Post page.




Visa, Master Card, Discover Card, American Express PayPal

Home  |  Our Mission  |  Contact Us  |  Privacy Policy  |  Shipping  |  Returns